SICK FX3-MOC1 - Page 16

Necessary module with firmware
fr
om version
Available from
Flexi Soft
Designer
Available from
Safety Designer
Devices
FX3-CPU0 No limitation V1.2.0 V1.6.x
FX3-CPU1 No limitation V1.2.0 N. a.
FX3-CPU2 No limitation V1.2.0 N. a.
FX3-CPU3 No limitation V1.2.0 N. a.
FX3-XTIO No limitation V1.2.0 V1.6.x
FX3-XTDI No limitation V1.2.0 V1.6.x
Gateways for PROFINET IO, Modbus® TCP and
E
therNet/IP™
FX3-CPUx V1.11.0 (Step 1.xx) V1.2.0 V1.6.x
CC-Link gateway FX3-CPUx V1.11.0 (Step 1.xx) V1.3.0 N. a.
CANopen gateway FX3-CPUx V1.11.0 (Step 1.xx) V1.3.0 V1.6.x
EtherCAT gateway FX3-CPUx V2.00.0 (Step 2.xx) V1.3.0 V1.6.x
EFI-pro gateway FX3-CPU0 V4.00.0 (Step 4.xx) N. a. V1.6.x
SIM1000 FXG
2)
FX3-CPUx V1.11.0 (Step 1.xx) V1.9.2 n.a.
Speed Monitor MOC3SA Unrestricted V1.3.0 V1.6.x
FX3-MOC0 FX3-CPUx V2.50.0 V1.5.0 N. a.
FX3-MOC1 FX3-CPUx V2.50.0 V1.8.0 V1.6.x
FX3-XTDS Unrestricted V1.6.0 V1.6.x
FX0-STIO Unrestricted V1.6.0 V1.6.x
FX3-ANA0 FX3-CPUx V4.00.0 (Step 4.xx) V1.8.0 V1.7.0
Conformities
RoHS conformity FX3-XTIO FX3-XTIO V1.01.0 – –
1)
N. a. = Not available
2)
All other modules as from market introduction.
2)
You can find information on this gateway in the SIM1000 FXG operating instructions.
3 P
RODUCT DESCRIPTION
16
O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller 8012478/1IG6/2023-02-24 | SICK
Subject to change without notice