2. Select the correct device in the list.
3. Click Edit IP address.
4. Enter the new IP address for the device.
7.4 Default SensorApp: Nova 2D
The Nova 2D SensorApp with a pre-activated Quality Inspection license is pre-installed
on the device and is also available for download from SICK AppPool. The Nova 2D
SensorApp uses vision-based quality inspection to ensure that produced items have the
exact qualities required regarding presence and measurements of details.
Opening the user interface
Nova 2D is configured through a web-based graphical user interface. To open the user
interface from a web browser:
1. Open a web browser window.
2. Type the IP address of the device. The default IP address is 192.168.0.1.
Using tools
The Quality Inspection toolset contains a selection of software tools for image analysis,
result output, and communication. A help text for each tool is accessible directly from
the GUI. The tools are also listed and described in the Nova 2D Operating Instructions,
art no 8025687.
The Quality Inspection toolset is based on SICK Nova, which allows the user to create
and import additional tools. For a description of how to import a tool through SICK
AppManager, see the Nova 2D Operating Instructions. Information on SICK Nova tool
development is available from the SICK Support Portal, supportportal.sick.com.
7.5 Installing SensorApps
7.5.1 Available SensorApps
The available SensorApps for the device can be downloaded from SICK AppPool (http://
apppool.cloud.sick.com/). The use of SICK AppPool requires a SICK ID, which can be
obtained at the login page at the link above.
The Apps tab on each device page on www.sick.com contains a list of available Sensor‐
Apps for the device.
7.5.2 Installing or updating a SensorApp on the device
A SensorApp must be downloaded to the computer before installing it on the device.
There are two different options for downloading a SensorApp:
•
Online option: If the computer has Internet access when connected to the device,
the SensorApp can be downloaded and installed directly from SICK AppPool as
part of the installation procedure described below.
•
Offline option: If the computer does not have Internet access when connected to
the device, the SensorApp must be downloaded from the SICK AppPool to the
computer via a web browser prior to the installation.
To install or update a SensorApp using SICK AppManager:
1. Connect the device to the computer via Ethernet.
2. On the computer, open SICK AppManager.
3. Under the Device Search tab in SICK AppManager, click Scan to search for available
devices on the network.
4. In the list of available devices, select the device where you want to install the
SensorApp.
COMMISSIONING 7
8028305//2023-05 | SICK O P E R A T I N G I N S T R U C T I O N S | Inspector85x
35
Subject to change without notice
To Next Page
Loading...