11.7 Dimensional drawing
Figure 19: Structure and device dimensions, unit: mm (inch), decimal separator: period
1
4 tapped blind holes, M2.5, 5.5 mm deep, for mounting the spacer
2
2 M5 sliding nuts; 5.5 mm deep; pivoting; as an alternative method of mounting the
device
3
4 M5 tapped blind holes, 5.5 mm deep; for mounting the device
TECHNICAL DATA 11
8028305//2023-05 | SICK O P E R A T I N G I N S T R U C T I O N S | Inspector85x
49
Subject to change without notice
To Next Page
Loading...