•
Save firmware update log
•
Firmware update
The Settings menu includes the following alternative:
•
Show partial images
The Help menu includes the following alternative:
•
About
8.1.2 Parameter editor
Figure 21: Parameter editor button
Click the Parameter editor button in the user interface to open the Parameter editor. The
Parameter editor contains all the features that are available in the camera, sorted by
category (see "Features", page 35 for a full list of categories and features). To search for
a feature in the Parameter editor, use the search field in the upper left corner.
Figure 22: Parameter editor
Visibility options
The visibility options Beginner, Expert, and Guru defines which features that are shown in
the Parameter editor. They are described in the table below.
Table 37: Visibility options
Beginner Basic features that are enough to operate the camera.
Expert In addition to the basic features, also features that require a more in-depth
knowledge of the camera functionality.
Guru All features that are available in the camera. This includes advanced fea‐
tures that can bring the camera into a state where it will not work properly
anymore.
OPERATION 8
8020774/14IM/2019-07 | SICK O P E R A T I N G I N S T R U C T I O N S | Ranger3
47
Subject to change without notice