Button Name Description
Move Click and drag to move the image.
Shortcut command: Ctrl+W.
Shift+ press and hold the mouse scroll wheel.
Rotate Click and drag to rotate the image.
Shortcut command: Ctrl+E.
Press and hold the mouse scroll wheel.
Zoom Click and drag upwards to zoom in and downwards to zoom out.
Shortcut command: Ctrl+R.
Rotate the mouse scroll wheel.
3D navigation control
Use the 3D navigation control in the lower left corner of the image viewer to switch
between different viewing angles:
•
Click an arrowhead (X, Y or Z) to view a 2D projection of the object.
•
Click the same arrowhead twice to flip the 2D projection (for example, to switch
between the top and bottom view for the Z-axis).
•
Press Home to restore the original viewing position.
Figure 28: 3D navigation control
8.1.4.1 Pointer information
If you use the Select image handling control and move the mouse pointer over the
image area, some information is shown. For a 2D image, the coordinates and the inten‐
sity value of each point are displayed. This information is useful for example when you
set the height of a region, see "Setting sensor region", page 57. For a 3D image, the
coordinates, the sensor row, and the encoder counter value of each point are displayed.
Figure 29: Pointer information (2D image)
8.1.5 Image view options
Button Name Description
Color View image in color (various options) or grayscale.
Options Contains options for Color Range, Surface and Points, as described in this
manual.
Home Restore default settings for position and zoom.
OPERATION 8
8020774/14IM/2019-07 | SICK O P E R A T I N G I N S T R U C T I O N S | Ranger3
51
Subject to change without notice
To Next Page
Loading...
