8.2.13 Handling log messages
1. Select which log you want to study:
a) To handle log messages from the GUI, click Log.
b) To handle log messages from the device, click Device log.
2. In the Log level drop-down list, select which type of log messages you want to see.
You see log messages on the selected level and the levels above it. For example, if
you select WARNING, only log messages on level SEVERE and WARNING will be
shown.
3. To manually save the data as a log file, click Save to file.
✓
All log messages are saved, also the messages that have a lower log level than the
one selected above.
4. To delete all log messages, click Clear.
The log messages are always automatically saved as a java log, but when you use the
Save to file button, the saved log will have a different format and you can select the file
location.
8.2.14 Updating firmware
To update the camera's firmware, you load an .aes file in the following way:
1. In the Device menu, select Firmware update.
2. Find and select the firmware file and click Open.
✓
The Firmware updater window opens and the firmware update starts automatically.
Figure 54: Firmware updater window
✓
When the update is finished, the device re-starts automatically.
3. Click Close.
4. Reconnect to the device, see "Connecting and getting a 2D image", page 52.
8
OPERATION
66
O P E R A T I N G I N S T R U C T I O N S | Ranger3 8020774/14IM/2019-07 | SICK
Subject to change without notice
To Next Page
Loading...
