Figure 26: Workflow step Image
Data collection
Here you view the 3D image that is the result of using the laser triangulation
(linescan3D) mode.
Figure 27: Workflow step Data collection
8.1.4 Image handling controls
Use the image handling controls to manipulate regions and perspective when viewing
images. As an alternative to the buttons, you can use a mouse with a scroll wheel, as
described below.
Button Name Description
Select Click and drag to change the size and position of the image.
Shortcut command: Ctrl+Q.
8 OPERATION
50
O P E R A T I N G I N S T R U C T I O N S | Ranger3 8020774/14IM/2019-07 | SICK
Subject to change without notice
To Next Page
Loading...
