SICK RFH630

Chapter 3 Technical Information
RFID write/read device RFH630 (HF)
14 © SICK AG · Germany · All rights reserved · Subject to change without notice 8014957/YSU6/2016-01-08
Electrical installation
3.3.3 RFH630-1102101 ("Ethernet" connection) to Ethernet (M12)
Cable no. 6034420 (2 m), no. 6034421 (3 m), 6034422 (5 m)
3.3.4 RFH630-1102101 ("Power/SerialData/CAN/I/0" connection) to customer spe-
cific connection box (power supply)
No. 6042772 (3 m), no. 6042773 (5 m)
s
Pin Signal Function Pin
1 TD+ (Ethernet) Sender+ 1
3 TD– (Ethernet) Sender– 3
2 RD+ (Ethernet) Receiver+ 2
4 RD– (Ethernet) Receiver– 4
Pin Signal Function Color of lead
1GND Ground Brown
2 DC 10 V ... 30 V Supply voltage Blue
3 CAN L CAN bus (IN/OUT) White
4 CAN H CAN bus (IN/OUT) Green
5 TD+ (RS-422), Host Host interface (receiver+) Pink
6 TD– (RS-422)/TxD (RS-232), Host Host interface (receiver–) Yellow
7 TxD (RS-232), Aux Aux interface (sender) Black
8 RxD (RS-232), Aux Aux interface (receiver) Gray
9 SensGND Common ground for all inputs Red
10 Sensor 1 Switching input 1 Purple
11 RD+ (RS-422), Host Host interface (receiver+) Gray-pink
12 RD– (RS-422)/RxD (RS-232), Host Host interface (receiver–) Red-blue
13 Result 1 Switching output 1 White-green
14 Result 2 Switching output 2 Brown-green
15 Sensor 2 Switching input 2 White-yellow
16 N.c. – Yellow-brown
17 N.c. – White-gray
3
2
41
3
2
41
M12 male connector,
D-type encoded
Front View
M12 male connector,
D-type encoded
Front View
 
M12 female connector,
A-type encoded
Front view
...

17
16
10
11
12
15
14
6
5
4
13
7
8
9
1
2
3