Technical Information Chapter 3
RFH630
Electrical installation
8014957/YSU6/2016-01-08 © SICK AG · Germany · All rights reserved · Subject to change without notice 13
3.3 Pin assignments and lead color assignments of cables
3.3.1 RFH630-1102101 ("Power/SerialData/CAN/I/0" connection) to CDB620-001
Cable no. 2049764 (0.9 m), no. 2055419 (2 m), no. 2055420 (3 m)
3.3.2 RFH630-1102101 ("Ethernet" connection) to PC
Cable no. 6034414 (2 m), no. 6034415 (5 m)
Pin Signal Function Pin
2 DC 10 V ... 30 V Supply voltage 1
8 RxD (RS-232), AUX Aux interface (receiver) 2
7 TxD (RS-232), Aux Aux interface (sender) 3
15 Sensor 2 Switching input 2 4
1GND Ground 5
11 RD+ (RS-422), Host Host interface (receiver+) 6
12 RD– (RS-422)/RxD (RS-232), Host Host interface (receiver–) 7
5 TD+ (RS-422), Host Host interface (sender+) 8
6 TD– (RS-422)/TxD (RS-232), Host Host interface (sender–) 9
4 CAN H CAN bus (IN/OUT) 10
3 CAN L CAN bus (IN/OUT) 11
13 Result 1 Switching output 1 12
14 Result 2 Switching output 2 13
10 Sensor 1 Switching input 1 14
9 SensGND Common ground for all inputs 15
16 N.c. – –
17 N.c. – –
Pin Signal Function Pin
1 TD+ (Ethernet) Sender+ 1
3 TD– (Ethernet) Sender– 2
2 RD+ (Ethernet) Receiver+ 3
4 RD– (Ethernet) Receiver– 6
6
1
10
5
11
15
M12 female connector,
A-type encoded
Front view
D Sub HD male
connector
Front view
17
16
10
11
12
15
14
6
5
4
13
7
8
9
1
2
3
3
2
41
M12 male connector, D-type encoded
Front view
RJ-45 male
connector
Front view
To Next Page
Loading...
