SICK SIM1000 FXA - Terminal Block 3 and 4; Ethernet Connections

NOTE
The SIM1000 FXA is supplied with power from an external power supply unit via the
pins A1 and A2.
The SIM1000 FXG is supplied with voltage via the internal FLEXBUS+ bus.
6.5.2 Terminal block 3 and 4
Designation Mode
RS-422 RS-485 Incremental encoder
R1+ R1+ - A+ (in/out)
R1- R1- - A- (in/out)
T1+ T1+ Rx1+/Tx1+ -
T1- T1- Rx1-/Tx1- -
R2+ R2+ - B+ (in/out)
R2- R2- - B- (in/out)
T2+ T2+ Rx2+/Tx2+ -
T2- T2- Rx2-/Tx2- -
NOTICE
Shielded cables must be used. The shielding of the cables must be connected to
functional earth.
6.5.3 Ethernet connections
Port 1: 100 MBit/s
ELECTRICAL INSTALLATION 6
8023299/1BLK/2021-07-28 | SICK O P E R A T I N G I N S T R U C T I O N S | SIM1000 FXA, SIM1000 FXG
21
Subject to change without notice