Siemens 340 - Page 105

Operator control and monitoring
7.2 Displays and location of the connections
SIRIUS 3RM1 motor starter
Manual, 11/2013, A5E0345285095020A/RS-AB/002
105
Terminal cover
Depending on the version of the 3RM1 motor starter, the device will have the following
connections:
Motor starter version
Inscription of the terminal
cover
Control circuit (at the top of the device)
Standard
•
24 V DC
• Direct-on-line starter 3RM10.-...0. (IN1)
• Reversing starter 3RM12.-...0. (IN1 and IN2)
•
110-230 V AC/110 V DC
• Direct-on-line starter 3RM10.-...1. (IN1)
• Reversing starter 3RM12.-...1. (IN1 and IN2)
Failsafe
•
24 V DC
• Direct-on-line starter (3RM11.-...0.) (IN1,
M1)
• Reversing starter (3RM13.-...0.) (IN1 and
IN2, M1 and M2)
•
110-230 V AC/110 V DC
• Direct-on-line starter 3RM11.-...1. (IN1)
• Reversing starter 3RM13.-...1. (IN1 and IN2)
Main circuit (at the bottom of the device)
All motor starters
All motor starters
*
)
IN2 only in the case of reversing starters (3RM12 and 3RM13)
**
)
M2 only in the case of Failsafe reversing starters (3RM13)