Connection
6.7 Connecting the infeed system (option)
SIRIUS 3RM1 motor starter
96 Manual, 11/2013, A5E0345285095020A/RS-AB/002
Please note the following requirements for mounting the 3RM19 infeed system:
● Make sure the rated operational current of the infeed system (IEC: 25 A; UL: 16 A) is not
exceeded.
● The 3RM1 motor starters are mounted next to each other on a mounting rail or a level
mounting surface.
● The mounting system is only suitable for main current terminals with screw connections.
● Cross-tip screwdriver size PZ 1 x 80
● For suitable connection cross-sections of the cables for the infeed terminal, see the
Chapter "General technical data (Page 128)".