Siemens 340 - Disconnecting the Push-In Terminals

Connection
6.4 Disconnecting the push-in terminals
SIRIUS 3RM1 motor starter
Manual, 11/2013, A5E0345285095020A/RS-AB/002
93
6.4
Disconnecting the push-in terminals
WARNING
Hazardous Voltage.
Can Cause Death, Serious Injury, or Property Damage.
Turn off and lock out all power supplying this device before working on this device.
Requirements
● Screwdriver DIN 5264 of the size 0.5 x 3 mm
Procedure
Step
Operating instruction
Figure
1 Insert the flat-head screwdriver into the
rectangular opening of the spring-loaded
terminal until it engages.
2 Remove the cable from the oval opening.
3 Remove the screwdriver.