Operator control and monitoring
7.2 Displays and location of the connections
SIRIUS 3RM1 motor starter
Manual, 11/2013, A5E0345285095020A/RS-AB/002
109
You acknowledge all other faults using the "TEST/RESET/RESET MODE" button. As an
alternative, in the case of the 3RM10/3RM12 Standard motor starters, you can use the
RESET control input IN3 for acknowledgement. You will find information about setting the
reset method in the chapter Setting the RESET method (Page 100).
If the possible fault causes have been rectified and resetting is still not possible, the 3RM1
motor starter must be replaced.
To Next Page
Loading...
