Siemens 7VK512

4ECHNICAL DATA6+
6
#
' #

 3YNCHRONISM AND VOLTAGE CHECK OPTIONAL
/PERATION MODES
#HECK PROGRAMS FOR AUTO
RECLOSE CHECK SYNCHRONISM
DEAD
LINE LIVE BUS CHECK
DEAD
BUS LIVE LINE CHECK
DEAD
BUS DEAD LINE CHECK
OVERRIDE
OR COMBINATIONS
ASYNCHRONOUS SWITCHING IS POSSIBLE
#HECK PROGRAMS FOR MANUAL CLOSE SAME AS FOR AUTO
RECLOSE INDEPENDENT SETTINGS
6OLTAGES
MINIMUM OPERATING VOLTAGE  6
5 FOR DEAD
LINE OR DEAD BUS CHECK  6 TO  6 STEPS  6
5 FOR LIVE
LINE OR LIVE BUS CHECK  6 TO  6 STEPS  6
MEASURING TOLERANCE   OF SET VALUE OR  6
RESET RATIO APPROX  
5 MEASUREMENT
SETTING RANGE  6 TO  6 STEPS  6
MEASURING TOLERANCE  6
 MEASUREMENT
SETTING RANGE 
TO  STEPS  
MEASURING TOLERANCE 
F MEASUREMENT
SETTING RANGE FOR SYNCHRONOUS SWITCHING  (Z TO  (Z STEPS  (Z
SETTING RANGE FOR ASYNCHRONOUS SWITCHING  (Z TO  (Z STEPS  (Z
MEASURING TOLERANCE  M(Z
MINIMUM OPERATING VOLTAGE  6
4IMES
MINIMUM MEASURING TIME APPROX  MS
APPROX  MS WITH STANDING MEASURED VALUES
ACTIVE TIME  S TO  S STEPS  S