52
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
Settings:
l Boost ventilation ventilates the living zone at the highest stage.
l The controller returns to operation using the presettings as soon as the living
zone is ventilated.
l Setting '...' disables or switches off the function.
Proceed as follows to conduct boost ventilation:
w The desired living zone is selected.
1. Turn the control knob until the temporary setting is preselected.
2. Press the control knob.
The temporary setting is selected and is displayed inverted.
3. Turn the control knob to temporarily conduct boost ventilation in the desired
living zone.
4. Press the control knob to confirm "boost ventilation".
Settings:
l Phases are defined in the time program during which the living zone is
actively used.
l The living zone is ventilated during these phases at the comfort stage.
To change the time switch program, proceed in the manner as described for the
temperature page.
Boost ventilation
(temporary)
Set the time program
To Next Page
Loading...
Need help?
General
