Siemens Albatros2 Technical Manual

Plant operation, quick access
5
Operate hot water
53
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
5.4 Operate hot water
Evaluation information
l The hot water page provides a summary of present hot water settings.
l The following is displayed at a maximum:
– Operating mode.
– Whether recharging is active.
– Nominal setpoint.
– The time program for the present day.
Functions in operating mode "On".
Nominal setpoint setting and time program are normally available in operating
mode "On" (depending on the controller configuration).

Siemens Albatros2 Specifications

General

Brand	Siemens
Model	Albatros2
Category	Recording Equipment
Language	English