Siemens Albatros2 - Mounting QAA74 Room Unit

3
Mount and connect
Mounting QAA74 room unit
20
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
3.2 Mounting QAA74 room unit
l The clarifications outlined in Section "Room units QAA74 [➙ 11]" have been
made.
l You need the following to mount the QAA74:
– At least 3, a maximum of 7 screws
– Maximum screw diameter: 3.5 mm
– Maximum screw head height: 2.4 mm
The QAA74 is suitable for Flush mount cable routing [➙ 20] and Surface mount
cable routing [➙ 25].
3.2.1 Flush mount cable routing
Take off the rear side mounting plate
b
2348Z01
Prerequisites