Siemens Albatros2 Technical Manual

11
Appendix
Room/operator unit param
eters
88
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
11.1.2 Settings in detail
Operating page "Time of day and date"
No. Operating line Settings
1 Time
2 Date
5 Start of summertime
6 End of summertime
The controller has a yearly clock with time of day, weekday and date.
Time and date must be correctly set to guarantee year round, fully automatic
control operation.
The dates set for the changeover to summer or wintertime ensure that on the first
Sunday after the set date the time of day will change from 02:00 (wintertime) to
03:00 (summertime) and from 03:00 (summertime) to 02:00 (wintertime).
If the entered date is on a Sunday, it changes over on that Sunday.
Operating page "Operator unit"
No. Operating line Settings
20 Language German ¦ English ¦ French ¦ Italian ¦ etc.
39 Commissioning menu Off ¦ On
Select unit language.
Depending on the controller, the setting switches on or off the entire commissioning
wizard or just the chapter of the commissioning wizard specific to the operator unit.
Setting Description
On*
The very first time a room unit or operator unit is commissioned, the
entire commissioning wizard or the supplemental chapter specific to the
operator unit is switched on.
The value is set to off after initial commissioning.
Off*
The entire commissioning wizard or the chapter specific to the operator
unit is switched off.
* Impact depends on controller
Daylight saving
time/standard time
changeover
Operation and display
Language
Commissioning menu

Siemens Albatros2 Specifications

General

Brand	Siemens
Model	Albatros2
Category	Recording Equipment
Language	English