56
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
6 Evaluate plant and set
"Evaluate plant and set" is done in the end-user or expert view.
End-user view Expert view (here: User levels 3=OEM)
The information and settings are the same in both views, with the exception of
special functions that are still based on the user level.
You can conduct the following operating steps on one room unit QAA74 or one
operator unit AVS74, but with fewer or even no special functions available on the
room unit.
Basic navigation on the navigation bar and work area for the following menus is
described in Section "Operation [➙ 36]", section "Navigate and set with the control
knob".
Basic navigation
To Next Page
Loading...
Need help?
General
