Siemens Albatros2 Technical Manual

11
Appendix
Special operations
94
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
11.2 Special operations
Available special operations depend on the controller. The following depicts how to
proceed with selected special operations. The list is not all-encompassing.
The technical functionality of special functions is described on the user guide for
your controller.
NOTICE
Damage to property caused by the improper use of special functions
.
Special functions can trigger unwanted operating states.
● Read the corresponding information in the user's guide for your controller.
● Contact a heating engineer if you are unsure about the consequences of a
special function.
Eco mode
Notes on Eco mode are available in user's guide for your controller.
w Navigation to special operation menu is described in Section "Operate special
functions [➙ 66]".
1. Select "Eco mode" = "On".
The function is activated.
2. Conclude the function with "Eco mode" = "Off".
Depending on the controller, the energy savings function Eco mode is displayed
without the maintenance/special operating symbol is displayed.
Procedure

Siemens Albatros2 Specifications

General

Brand	Siemens
Model	Albatros2
Category	Recording Equipment
Language	English