Siemens Albatros2 Technical Manual

Appendix
11
Room/operator unit parameters
91
Siemens Graphical User Interface UI400 CE1U2348en
Building Technologies 2014-06-03
The room temperature and humidity value for room unit 1 can be assigned to the
zones. If only 1 heating circuit is assigned, the room temperature value is always
assigned to it.
Setting Description
Zone 1 only
Zones 2 and 3 do not receive their room values from room unit 1;
except for zone 1.
For all assigned zones
Zones 2 and 3 do not receive (if assigned) their room values from
room unit 1; zone 1 too.
The action of the 'Warmer/Cooler' function from room unit/operator unit 1 can be
assigned to the relevant heating circuits. 'Warmer/Cooler' acts on only zone 1, if
only zone 1 is assigned.
Setting Description
None
Zone 1 has no 'Warmer/Cooler' function. 'Warmer/Cooler'
functions for zones 2 and 3 cannot be operated on room/operator
unit 1.
Zone 1 only
'Warmer/Cooler' functions for zones 2 and 3 cannot be operated
on room/operator unit 1; exclusively those from zone 1.
For all assigned zones
'Warmer/Cooler' functions for zones 2 and 3 (if assigned) cannot
be operated on room/operator unit 1; as well as those from zone
1.
Depending on the selected "Used as" of the unit (operating line 40), the following
settings (marked with X) can be made when assigning the zone:
Operating line
40 42 44 46 47 48
Room unit 1 Zone 1
Zone 1 and 2 x x x
Zone 1 and 3 x x x
All zones x x x x
Room unit 2
Room unit 3
Operator unit 1 Zone 1
Zone 1 and 2 x x
Zone 1 and 3 x x
All zones x x x
Operator unit 2
Operator unit 3
Room values device 1
(operating line 47)
'Warmer/Cooler' function
device 1 (operating line
48)
Overview of
dependencies

Siemens Albatros2 Specifications

General

Brand	Siemens
Model	Albatros2
Category	Recording Equipment
Language	English