76 WLAN Client Configuration List
DRAFT 22.04.2008
ARCADIS SP00-000.814.09.01.02 Siemens
11.07 CS PS SP
Page 76 of 78
Medical Solutions
Security Set-
tings for Man-
agement
Interface
Selection (also possible more than
once):
Command Line Interface (CLI / Tel-
net protocol - yes/no
WEB Based Management /HTML
protocol - yes/no
Simple Management Network Proto-
col (SMNP) - yes/no
With selection, the protocol interface to the
administration of the WLAN Client is defined.
At least one protocol interface must be
selected.
Recommendation: Select at least WEB
Based Management /HTML protocol.
Blocking Admin-
istration via the
Wireless Net-
work
Allow management only from wired
interface - yes/no
With selection, the WLAN Client can be
administered only via the Ethernet connec-
tion.
Security level Select from:
None (Open System)
Low (Shared key)
Medium (WPA2-PSK)
High (WPA2 RADIUS)
Select the appropriate security level.
The None and Low security levels are NOT
recommended!
Note: Other combinations comprised of
authentification, code type and code origin
can be configured manually in the Security
menus of the WLAN Client WEB server.
Low Security
Level
Default key
Length
Key
Select from: Key 1- Key 4
Select from: 40, 104 or 128 Bit
___________________________
Select Key 1. A max. of 4 keys can be saved.
40 Bit: 5 ASCII characters or 10 hexadecimal
figures (0-F).
104 Bit: 13 ASCII characters or 26 hexadeci-
mal figures (0-F).
128 Bit: 16 ASCII characters or 32 hexadeci-
mal figures (0-F).
Depending on the "Length" selection, enter
the appropriate key in the listed length.
Security level
Medium
Pass Phrase ___________________________
Enter the WPA2 key.
Length: 8 to 63 characters or exactly 64
hexadecimal figures.
WLAN Client
Security Wiz-
ard Data
Value Comments
To Next Page
Loading...
Need help?
General
