the next available reported result.the next available reported result.
When the cycle key is When the cycle key is
selected, the result for that test is printed and sselected, the result for that test is printed and s
with an exclamation point (!) to indicate that it was edited, even with an exclamation point (!) to indicate that it was edited, even
if the resultif the result
is reset to its original value.is reset to its original value.
If the selected output format is CCS, If the selected output format is CCS,
an E is transmitted with the results.an E is transmitted with the results.
Previous ScreenPrevious Screen
when editing is complete for that record to when editing is complete for that record to
the Confirmatory Report.the Confirmatory Report.
above for each record.above for each record.
Return to Ready/RunReturn to Ready/Run
Confirmatory Report A.Confirmatory Report A.
When you leave a Report, you When you leave a Report, you
are not able to edit the are not able to edit the
report any further.report any further.
Records for Confirmatory Report Records for Confirmatory Report
above to edit these records.above to edit these records.
Return to Ready/Return to Ready/
to exit the Confirmatory Reports.to exit the Confirmatory Reports.
When you leave the Edit routine, you are not able to edit the run anyWhen you leave the Edit routine, you are not able to edit the run any
Records in the Records in the
Microscopic Report displayMicroscopic Report display
After you exit ConAfter you exit Con
firmatory and Microscopic Repofirmatory and Microscopic Repo
rt screens, results for thert screens, results for the
records included in Confirmatory Reports A and B are sent to records included in Confirmatory Reports A and B are sent to
the printer andthe printer and
, all other records are printed and , all other records are printed and
transmitted as soon as they aretransmitted as soon as they are
Merging Data from Microscopic TestingMerging Data from Microscopic Testing
Use this procedure to add the Use this procedure to add the
microscopic test results:microscopic test results:
This option is only available if you created customized microscopy headings.This option is only available if you created customized microscopy headings.
Enter Microscopics resultsEnter Microscopics results
to start the search.to start the search.
The patient ID results display with the earliest test displayed first.The patient ID results display with the earliest test displayed first.
to select the correct test to select the correct test
Select ResultSelect Result
To Next Page
Loading...
Need help?
General
