Siemens CPU 315-2 DP Hardware And Installation Guide


S7-300 Automation System, Hardware and Installation: CPU 31xC and CPU 31x
A5E00105492-03
9-1
&RPPLVVLRQLQJ

 ,QWKLV&KDSWHU
,QWKLV&KDSWHU
There are notes on commissioning which you should take into account in order to
avoid personal injury or damage to machines.
1RWH
Since your commissioning phase is determined primarily by your application, we
can only offer you general information, without claiming completeness of this topic.
&URVVUHIHUHQFH
Note the information about commissioning provided in the descriptions of your
plant section and equipment.
 &RPPLVVLRQLQJ3URFHGXUH
5HTXLUHPHQWV
To utilize the full functional scope of the CPUs, you require
• STEP 7 V 5.1 + SP 4 and higher for CPUs 31xC, 312, 314, and 316-2 DP
• STEP 7 V 5.2 + SP 1 and higher for CPU 317-2 DP
• S7-300 is installed
• S7-300 is wired
• With networked S7-300:
– MPI/PROFIBUS addresses are configured
– The segments are terminated with active terminating resistors

Siemens CPU 315-2 DP Specifications

General

Memory	64 KB
Power Supply	24 V DC
Order Number	6ES7 315-2AG10-0AB0
Number of DP Masters	1
Number of DP Slaves	124
Load Memory	64 KB
Number of Timers	256
Number of Counters	256
Data Memory	64 KB
Operating Temperature	0 to 60 °C
Integrated Interfaces	MPI, DP
Digital Outputs	Not integrated
Analog Inputs	Not integrated
Analog Outputs	Not integrated
Programming Languages	LAD, FBD, STL
Digital Inputs	Not integrated
Weight	660 g