Housings and Mounts
Housing Mounts
3-9© Siemens Building Technologies Group
3
Type Order No.
CHBP1810
Pedestal-Mount for CHSM2510/CHSL2610
Aluminium pedestal for mounting housings on the top of poles or
building parapets. The integrated joint enables the top-mounted hous-
ing to be rotated and tilted. Four fixing holes on the base enable stable
mounting on flat surfaces. Provided complete with stainless-steel fix-
tures to attach the housing to the mount.
Arm length 185 mm
Dimensions (W x H x D) 121 x 121 x 185 mm
Colour Silver (RAL9006)
Finish Epoxy powder-coat
Load rating 25 kg
Weight 1.0 kg
2GF1705-8LJ
WMB-HM-HH
Wall Mount Bracket for CHM‚ CHH
For mounting a CHM/CHH housing on a vertical surface.
Arm length 226 mm
Dimensions (W x H x D) 150 x 355 x 205 mm
Colour Off-white (RAL9002)
Finish Cast aluminium
Load rating 8 kg
Weight 1.50 kg
2GF1705-8GB
WMB-S-M-B
Bracket for ECH-B / ECH-M
Aluminium wall mount with integral swivel-tilt joint and internal cable
channel for secure cabling from the wall‚ directly into the camera hous-
ing through the bracket‚ ensuring no visible cables. The housing posi-
tion is secured with a single clamping/adjustment bolt.
Arm length 227 mm
Dimensions (W x H x D) 227 x 75.4 x 86 mm
Colour Off-white (RAL9002)
Finish Epoxy powder-coat
Load rating 25 kg
Weight 0.50 kg
2GF1705-8LB
HMB-PH
Mounting Block
For installation of a protective housing on a horizontal or inclined sur-
face‚ on a wall bracket or pole bracket.
Dimensions (W x H x D) 58 x 70 x 61 mm
Colour Matt black
Finish Cast aluminium
Load rating 30 kg
Weight 0.25 kg
2GF1710-8AW
To Next Page
Loading...
