Siemens ET 200S - Page 215

8-1
Distributed I/O System ET 200S
EWA 4NEB 780 6024-02 07
Interface Modules
Chapter Overview
Section Description Page
8.1 Parameters for Interface Modules 8-1
8.2 IM151-1 BASIC Interface Module (6ES7 151-1CA00-0AB0) 8-7
8.3 IM151-1 STANDARD Interface Module (6ES7 151-1AA02-0AB0) 8-10
8.4 IM151-1 FO STANDARD Interface Module
(6ES7 151-1AB01-0AB0)
8-13
8.5 IM151-1 HIGH FEATURE Interface Module
(6ES7 151-1BA00-0AB0)
8-16
8.1 Parameters for Interface Modules
Parameters for the IM151-1BASIC Interface Module
Table 8-1 Parameters for the IM151-1 BASIC Interface Module
IM151-1 BASIC
Value Range Default Applicability
Operation at Preset
<> Actual
configuration
Disable/enable Disable ET 200S
Identifier-related
diagnostics
Disable/enable Enable ET 200S
Module status Disable/enable Enable ET 200S
Channel-specific
diagnosis
Disable/enable Enable ET 200S
Analog-value format SIMATIC S7
SIMATIC S5
S7 ET 200S
Interference
frequency
suppression
50 Hz/60 Hz 50 Hz ET 200S
8