Siemens FLENDER H SH Series - Page 74

74 / 96
BA 5030 en 02/2013
2
5
4
1
3
6
8
7
9
Fig. 58: Oil inlet / oil drain on gear units type B... ≥ 13
Gear unit with auxiliary drive:
4
5
1
2
3
Fig. 59: Oil inlet / oil drain on gear units type B3.. ≤ 12 with auxiliary drive
5
1
2
4
8
9
4
3 3
Fig. 60: Oil inlet / oil drain on gear units type B3.. ≥ 13 with auxiliary drive
1 Inspection and/or assembly cover 6 Backstop
2 Oil dipstick 7 Cover for backstop
3 Oil inlet 8 Screw plug for oil inlet backstop
4 Oildrain plug 9 Screw plug for residualoil drainage backstop
5 Breather screw or screw plug
A detailed view of the gear unit can be obtained from the drawings in the gearunit documentation.
For details regarding the auxiliary gear unit please see the special operating instructions.
(The auxiliary gear unit is delivered ex works with oil filling.)