76 / 96
BA 5030 en 02/2013
7.1.2.1 Oil quantities
Table 26: Approximate values for required oil quantities in horizontal gear units with radial shaft-sealing
rings and Taconite seals
Type
Oil quantity (approximate value) in litres for size
1 2 3 4 5 6 7 8 9 10 11
H1SH
2.5 - 7 - 22 - 42 - 68 - 120
H2.H
- - - 10 15 16 27 30 42 45 71
H2.M
- - - - - - - - - - -
H3.H
- - - - 15 17 28 30 45 46 85
H3.M
- - - - - - - - - - -
H4.H
- - - - - - 25 27 48 50 80
H4.M
- - - - - - - - - - -
B2.H
3.5 8 - 10 16 19 31 34 48 50 80
B2.M
- - - - - - - - - - -
B3.H
- - - 9 14 15 25 28 40 42 66
B3.M
- - - - - - - - - - -
B4.H
- - - - 16 18 30 33 48 50 80
B4.M
- - - - - - - - - - -
Type
Oil quantity (approximate value) in litres for size
12 13 14 15 16 17 18 19 20 21 22
H1SH
- 175 - 190 - 270 - 390 - - -
H2.H
76 135 140 210 215 290 300 320 340 320 340
H2.M
- 110 115 160 165 230 240 300 320 350 370
H3.H
90 160 165 235 245 305 315 420 450 470 490
H3.M
- 125 130 190 195 240 250 390 415 515 540
H4.H
87 130 140 230 235 290 305 360 380 395 420
H4.M
- 120 125 170 175 225 230 310 330 430 450
B2.H
95 140 155 220 230 320 335 - - - -
B2.M
- 120 130 180 190 260 275 - - - -
B3.H
72 130 140 210 220 290 300 380 440 370 430
B3.M
- 110 115 160 165 230 235 360 420 420 490
B4.H
90 145 150 230 235 295 305 480 550 540 620
B4.M
- 120 125 170 175 230 235 440 510 590 680
Table 27: Approximative values for additional oil quantities for the intermediate flange when adding on
the auxiliary drive to the main gear unit
Type
Additional oil quantity (approximate value) in litres for size
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
B3.H
1 2 2 5 5 5 6 12 12 15 15 20 20 25 25 40 40 60 60
For details regarding the auxiliary gear unit please see the Special operating instructions.
(The auxiliary gear unit is delivered ex works with oil filling.)
To Next Page
Loading...