23 / 84
BA 9142 en 02/2015
Table 3: Examples of combined storage (maximally one change in storage) and the resulting remaining
durability of the interior preservation of the gear unit
Original storage place of the gear unit
In which climatic zone is the construction site
located?
Setup in climatic zone A and at least 50 km
distance from larger bodies of salt water
How was the gear unit packaged for transport? None or simple
transport packaging
Transport in
seaworthy packaging
2)
How was the gear unit transported? without sea transport with or without sea transport
In what packaging was the gear unit stored at the
construction site?
no packaging seaworthy packaging
2)
Where/how was the packed unit stored?
in closed room
or
under roof
1)
covered with
loose tarpaulin
in closed room
or
under roof
1)
exposed
outdoors
or
covered with
loose tarpaulin
Change of storage
New
packaging for
storage
Storage place of
the
repackaged unit
Change of
original
storage
method after
Durability period of interior preservation of the gear unit for the new
storage method in consideration of the previous storage period in months
without
packaging
exposed
outdoors
1 month 4 1/2 4 5 4 1/2
3 months 4 3 4 1/2 4
6 months 3 1 4 3 1/2
12 months 1
not permissible,
max. durability
period 7 months
2 1/2 2
18 months
not permissible,
max. durability
period
15 months
not permissible,
max. durability
period 7 months
1 1/2 1/2
covered with
loose tarpaulin
exposed
outdoors
1 month 6 1/2 6 7 1/2 7 1/2
3 months 5 1/2 4 7 7
6 months 4 1 6 5 1/2
12 months 1 1/2
not permissible,
max. durability
period 7 months
4 3
18 months
not permissible,
max. durability
period
15 months
not permissible,
max. durability
period 7 months
2 1
To Next Page
Loading...
Need help?
General
