18 / 55
BA 9213 en 03/2012
4.4.2 Exterior preservation
Table 5: Durability period for exterior preservation of shaft ends and other bright machined surfaces
Duration
of protection
Preservative
agent
Layer
thickness
Remarks
in case
of indoor storage
up to 36 months
1)
Tectyl 846 K19 approx. 50 μm
Longterm waxbased preservative
agent:
- resistant to seawater
resistant to tropical conditions
(soluble with CH compounds)
in case
of outdoor storage
up to 12 months
2)
1)
The gear unit must be stored in the position of use in a sheltered place; it must be placed on
a vibrationfree, dry base and covered over.
2)
If the gear unit is being stored out of doors, it must be particularly carefully covered, and care must be
taken that neither moisture nor foreign material can collect on the unit. Waterlogging should be avoided.
The procedure for interior and exterior preservation treatment is described in section 7
(see items 7.4.1.3 and 7.4.2.1)!
To Next Page
Loading...