70
Changing the basic
settings
There must be no program set.
Example: Hiding the time
1. Press the 6 clock button and the + button at the
same time until a1 appears in the display.
This is the basic setting for the time in the
foreground.
2. Change the basic setting using the + or – button.
3. Conform with the 6 clock button.
A
2 will appear in the display for the basic setting for
the signal duration.
Change the basic setting as described in step 2 and
confirm with the
6 clock button. You can now
change the reset time. To finish press the 6 clock
button.
You do not wish to change If you do not wish to change a basic setting, press
all the basic settings the 6 clock button. The next basic setting will
appear.
Correcting settings You may change your settings again at any time.
To Next Page
Loading...
