9
Cancelling operation
Press and hold the
† button for approximately 4 seconds, turn
the function selector and temperature selector back to the zero
position.
1, 2, 3 series of operations
You can use the SeriesOperations function to set up to three
different microwave power settings and times and then start.
Ovenware
Always use microwave-safe, heat-resistant ovenware.
Setting a series of operations
1. Set the function selector to ß.
2. Press the2 button.
The
ª for the first operation in the series appears on the
display.
3. Set the first microwave power setting and cooking time.
4. Press the 2 button.
The
« for the second operation in the series appears.
5. Set the second microwave power setting and cooking time.
6. Press the 2 button.
The
¬ for the third operation in the series appears.
7. Set the third microwave power setting and cooking time.
8. Press the † button.
Appliance operation begins. The first step in the series of
operations appears in the display. The cooking time starts
counting down.
Note: You can also combine a type of heating with the series of
operations. Set the type of heating first.
The cooking time has elapsed
A signal sounds. The series of operations is finished. You can
stop the audible signal by pressing the
0 button.
Changing the setting
Changes can only be made before operation begins. Press the
2 button repeatedly until the number for the series of
operations appears. Change the setting.
Opening the oven door during cooking
Operation is suspended. After closing the door, press the
†
button briefly. The programme will then continue.
Pausing operation
Press the
† button briefly. The oven is paused. Press the †
button again to continue operation.
Cancelling operation
Press and hold the
† button for approximately 4 seconds and
turn the function selector to the zero position.
Setting the time-setting options
Your oven has various time-setting options. You can use the 0
button to call up the menu and switch between the individual
functions. All the time symbols are lit when you can make
settings. The
N arrow shows you the time-setting option that is
active. A time-setting option that has already been set can be
changed direction with the
@ or A button when the N arrow is
next to the relevant time symbol.
Timer
You can use the timer as a kitchen timer. It runs independently
of the oven. The timer has its own signal. In this way, you can
tell whether it is the timer or a cooking time which has elapsed.
1. Press the 0 button once.
The time symbols light up in the display and the
N arrow is
next to
V.
2. Use the @ or A button to set the timer duration.
Default value for
@button = 10 minutes
Default value for
Abutton = 5 minutes
After a few seconds, the time setting is adopted. The timer
starts. The
NV symbol lights up in the display and the timer
duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds. 0:00 is shown in the display. Use the
0
button to switch off the timer.
Changing the timer duration
Use the
@ or A button to change the timer duration. After a few
seconds, the change is adopted.
Cancelling the timer duration
Use the
A button to reset the timer duration to 0:00. The
change will be adopted after a few seconds. The timer is
switched off.
Checking time settings
If several time-setting options have been set, the corresponding
symbols appear in the display. The timer counts down in the
foreground. The
W symbol is preceded by the N arrow and the
timer can be seen counting down.
To check the
W timer, x cooking time or 0 clock, press
the
0 button repeatedly until the arrow points to the
appropriate symbol. The value for this appears for a few
seconds in the display.
Setting the cooking time
The cooking time for your meal can be set on the oven. When
the cooking time has elapsed, the oven switches itself off
automatically. This means that you do not have to interrupt
other work to switch off the oven. The cooking time cannot be
accidentally exceeded.
Example in the picture: cooking time 45 minutes.
1. The function selector is used to set the type of heating.
2. The temperature selector is used to set the temperature or
grill setting.
To Next Page
Loading...
