Abbreviated Dialing
111
Storing Individual Speed Dialing Numbers
1.
Press the Program/Service key; the LED lights up.
Scroll to “Change Speed Dial?“ and confirm your
selection.
or
Enter the code for “Change Speed Dial.”
2.
Form this point on, simply follow the user
prompts.
(Enter speed dialing number
*
0 -
*
9; always en-
ter external numbers with the external code.)
Program/Service
9 2
You can program a dial pause between
two numbers with the Redial key. When
you press the # key, the subsequent digits
are transmitted as DTMF signals.
Any telephone user can store external
numbers on programmable keys
Æ
40 or
using station speed dialing, thus assigning
them to memory locations.
After all memory locations are full, the
message “US:Memory is full UK:Storage
space is full.” appears when you try to
save a number.
Telephones and optiset E key modules
that have been removed can take up mem-
ory needed for individual station numbers.
When disconnecting a telephone, there-
fore, first delete all station numbers.
To Next Page
Loading...
