2
Valid for Hicom® 150 E Office (Release 2.0
and Release 2.2) with the following sys-
tem telephones:
optiset E standard,
optiset E advance plus/comfort,
optiset E advance conference/conference,
optiset E memory,
and
optiset E key module.
This User Manual describes all functions
that can be implemented with your system
telephone.
It also gives you general information about
the adapters and telephone accessories
that can be used.
The functions you can use depend on the
individual class of service of your tele-
phone and on the configuration of your
system.
The described functions and features also
apply (without procedures) to the
optiset E entry and
optiset E basic
system telephones, and to commercially
available dial pulsing, touch tone, and ISDN
telephones.
All codes and station numbers (internal
numbers) specified in this User Manual are
default entries which may not necessarily
be the same as those stored in your sys-
tem.
Please ask your service technician for the
numbers applicable to your system.
To Next Page
Loading...
