Answering Calls
70
Activating function door release
1.
Press the Program/Service key; the LED lights up.
Scroll to ” Door opener on?“ and confirm your se-
lection.
or
Enter the code for “Door opener on?“.
2.
From this point on, simply follow the user
prompts.
(Enter the internal number of the entrance tele-
phone, the code and type of door release. If you
want the door to open without having to ring the
doorbell, you must choose “2=enable w/o ring”,
otherwise confirm “1=enable with ring”).
Program/Service
8 9
Default code 00000. To change the code,
choose “3=change password.“ Then fol-
low the user prompts.
To Next Page
Loading...
