Siemens HiPath 1120 - ADSL Connection in the LAN Interface Modules; ADSL Module; SLIMC, SADSLIM Modules

Installation
3-20 HiPath1120, Installation Guide
Installing modules
3.7.4 ADSL Connection in the LAN interface modules
3.7.4.1 ADSL module
Connection procedure
3.7.4.2 SLIMC, SADSLIM modules
Connection procedure
Figure 3-6 ADSL Connection on the HiPath 1120
Step Procedure
1. Connect the carrier’s ADSL line to slot 1 and 2 of the X2 Connector.
2. Connect slots 3 and 4 of the X2 Connector to the external line input for the HiPath
1100.
3. Connect your network cables to the HUB (J3, J5, J6 and J7 Connectors).
Step Procedure
1. Connect the carrier’s ADSL line to slot 1 and 2 of the X11.
2. Connect slots 3 and 4 of the X11 Connector to the external line input of the HiPath
1100.
3. Connect the cables of your network PCs to the HUB (X2, X3, X4 and X5
Connectors).