Siemens HiPath 1120 - Country;Group of Countries; Code Table for Countries and Groups of Countries

HiPath1120, Installation Guide
4-37
Programming mode
Country/group of countries
4.2 Country/group of countries
To configure the settings correctly select the country where the system will be used.
Required: Programming mode must be activated (*95 31994).
eji w
Enter the programming code.
pw
Enter the code for the country or group of countries as shown on the table below (e.g., "03" for
Portugal).
w
The system restarts after the change is made.
4.2.0.1 Code Table for Countries and groups of Countries.
Code Group Countries Display Language
01 Brazil (default) Brazil
Bolivia
Paraguay
*
Portuguese
Spanish
Spanish
02 Argentina Argentina Spanish
03 Portugal Portugal Portuguese
04 Chile Chile Spanish
05 Venezuela Venezuela Spanish
06 Mexico Mexico Spanish
07 Vietnam Vietnam English
08 IM Spanish Columbia
Uruguay
Ecuador
Central
America
Indonesia
**
Spanish
English