Programming mode
4-36 HiPath1120, Installation Guide
Language
4 Programming mode
You can change the default settings of the HiPath 1100 to fit your needs. An MF-type or system
telephone can be used for this purpose, or a PC with the HiPath 1100 Manager administration
software installed.
4.1 Language
Defines the language for displaying messages on the system telephone display. This field is not
automatically updated since it is based on the country option selected. When the Language
field is changed the Country is not automatically changed. It is possible, therefore, to select a
country with a different default language. Example: Country: Brazil, Language: English.
Required: Programming mode must be activated (*95 31994).
ejh w
Enter the programming code.
pw
Select the language for displaying messages.
d =Custom
e = Portuguese
f = Spanish
g = English (default)
h = French
i = Italian
j = Turkish
k = German
l = Dutch
w
Initial status for programming mode.
The instructions that follow refer to the factory default settings. For further
information please refer to the HiPath 1100 Programming Manual.
To Next Page
Loading...
