Siemens HiPath 1120 - Connections to the System; Hipath 1120

HiPath1120, Installation Guide
3-29
Installation
Connections to the System
3.9 Connections to the System
Introduction
Attach cables to the system’s Main Distribution Frame (MDF) and route them through the
conduits and openings to reach the carrier’s main telephone distribution cabinet. Below are
some examples of configurations.
3.9.1 HiPath 1120
Example
Figure 3-14 Distribution of extensions on the HiPath 1120 MDF
.
Warning
When using the RSA version, extension lines with a C/D interface must only be
installed indoors. Only regular extensions (without a C/D interface) can be installed
outdoors.
*The installation of a Profiset 3030 system telephone requires a CD pair in conjunction with an A/B extension
slot (see “Installing telephone terminals” on page 3-33).
!