Making Calls – Convenience Functions
43
Step by Step
Speed-dial
Using Station and System Speed-Dial Numbers
Precondition: You have stored station speed-dial num-
bers ! Page 43 or your service personnel has stored
system speed-dial numbers.
Press the key. The LED lights up.
> : Confirm
1
.
or
qk Enter the code.
o Enter a speed-dial number.
"
*
0" to
*
9" = station speed-dialing.
"000" to "999" = system speed-dialing (contact your ser-
vice personnel).
If applicable Suffix-Dialing
o If necessary, you can suffix-dial additional digits (for ex-
ample, the user’s extension) at the end of the saved sta-
tion number.
If this feature is configured, a suffix is automatically di-
aled (for example, "0" for the exchange) if no entries are
made within 4 or 5 seconds.
Storing Station Speed-Dial Numbers
You can store the ten numbers which you use the most
and dial them using your own station speed-dial num-
bers:
*
0 through
*
9 ! Page 43.
Press the key. The LED lights up.
> : Select and confirm
1
.
or
qmf Enter the code.
o Enter the speed-dial number you wish to use (
*
0 to
*
9). If the speed-dial number is already in use, the pro-
grammed station number appears on the screen.
:
:
Confirm.
o First enter the external code and then the external sta-
tion number.
Program/Service
*
7=Use speed-dialing?
[1] ”Different Displays (HiPath 4000 Environment)” ! Page 118
Program/Service
*
92=Change Speed-dial?
US: Change?
UK: Change entry?
To Next Page
Loading...
Need help?
General