Using Other Functions
95
Step by Step
Controlling Relays (not for HiPath 2000)
If this function has been configured (contact your ser-
vice personnel), you can turn up to four relays on and off
to control different facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
> : Select and confirm.
or
> :
or
qmd or rmd Enter the code for "on" or "off".
e ... h Enter the relay.
Sensors (HiPath 3300/3350/3500/3550
Only)
If this function has been configured (contact your ser-
vice personnel), sensors detect signals, causing your
phone to ring and a message to appear on your screen.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) ! Page 116!
*90=Control Relay On?
#90=Control Relay Off?
To Next Page
Loading...
