Siemens HIPATH 2000 Operating Instructions

Using Other Team Functions
99
Step by Step
or
> :
>
:
Select and confirm
1
.
This turns off the audible tone for the displayed group or
trunk.
or
> : Select and confirm.
This turns off the audible tone for all groups and trunks.
or
r Enter the code for "Leave all groups".
or
> : Select and confirm.
This turns off the audible tone for all groups and trunks.
or
q Enter the code for "Join all groups".
Accepting a Call for Another Member
of Your Team
You can accept calls for other telephones in your team
from your telephone even while engaged in another
call. To do this, contact your service personnel to find
out if a pickup group has been configured.
Precondition: Your telephone rings briefly. "Call for: "
appears on the upper display line with the station num-
ber or name of the originator; the station number or
name of the caller appears on the lower line.
: Confirm.
or
Press the key. The LED lights up.
qik Enter the code.
US: Join group?
UK: Join hunt group?
[1] ”Different Displays (HiPath 4000 Environment)” ! Page 118
#=Leave all groups?
*
=Rejoin all groups
If you deactivate the audible tone for another
group or trunk, or deactivate it for all groups and
trunks to which you belong, a special dial tone
sounds when you lift the handset.
Pickup - group?
Program/Service

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English