Siemens HIPATH 2000 Operating Instructions

Step by Step
Using Other Functions
94
Communicating with PC Applications
over a CSTA Interface
If this function has been configured (ask your service
personnel), you can use your telephone to communi-
cate with PC applications (CSTA = Computer Supported
Telecommunications Applications). You send informa-
tion to the application and receive information from the
application, for example, on your telephone's display.
qhmh Enter the code.
or
Press the "Data I/O Service" key.
(configuring keys ! Page 65).
o Enter the three-digit ID for the application you want to
operate.
u v d ... m < : > Use the relevant keys to communicate with the applica-
tion.
Temporarily interrupting communication with the
application:
n The telephone rings. You accept the call.
The "Data I/O Service" key flashes: communication with
the application was automatically interrupted.
Resuming communication with the application:
Press the flashing "Data I/O Service" key. The LED lights
up.
Ending communication with the application:
> : Select and confirm the appropriate CSTA message.
or
n t Lift and replace the handset.

Siemens HIPATH 2000 Specifications

General

Brand	Siemens
Model	HIPATH 2000
Category	Telephone
Language	English