Conducting calls – the basic functions
3
Step by step
Language
If your preferred language for the display texts is not
set, you can set this yourself (Æ Page 20).
First seize the line, then dial
c or d When the handset is idle: Press and hold down the Talk
key or press the Speakerphone key.
o Enter the required phone number. The user will be
called.
Typing errors cannot be corrected. If you make a typing
error, press the On-hook key.
either:
p The user answers. Conduct the call.
or:
The user is busy or rejects the call.
a Press the On-hook key briefly.
Dial first, then seize the line
Dialling preparation:
o and if necessary X Enter the required phone no. and correct individual char-
acters as necessary using the "Delete" Display key.
if necessary,
S Insert a dial pause. A "P" appears between the digits en-
tered. You may have to insert a pause, forexample, be-
tween the prefix and the phone number or when check-
ing a mailbox.
Dialling:
c or d Press the Talk key or Speakerphone key within 30 sec-
onds. The user will be called.
Feature not availab-
le.
Please replace hand-
set.
Note:
The dialling preparation function is also available
with number redial and when dialling from the
handset’s phonebook (Ó).
To Next Page
Loading...
Need help?
General