Siemens HiPath 3000 Operating Instructions

Conducting calls – the basic functions
9
Step by step
Forwarding calls
This function is for when you leave your desk for a while
and want certain calls to be forwarded to your new lo-
cation. The forwarding destination for internal calls can
be any internal or external phone number. The destina-
tion number is usually an external phone number be-
cause you can be reached internally anytime by means
of your handset.
Activating call forwarding
c or d Press and hold down the Talk key or press the Speaker-
phone key.
Call the system menu.
> < [Select the menu item and confirm.
either:
> < [Select the menu item and confirm.
or:
> < [Select the menu item and confirm.
or:
> < [Select the menu item and confirm.
then:
o Enter the destination phone number.
Save the settings.
a Press the On-hook key to end the operation.
Menu
Forwarding on?
1=all calls?
2=external
calls only?
3=internal
calls only?
Save
Note:
The external code must be entered before ex-
ternal phone numbers. If the service engineer
has activated DTMF DID, you can also forward
calls to these external phone numbers.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English