Siemens HiPath 3000 - Speed Access to Functions and Phone Numbers

Additional functions
111
Step by Step
• Base 1 - 4: Select base n to specify the precise HiP-
ath cordless system where the handset is regis-
tered.
• Best Base: If the handset is registered at multiple
cordless systems, it automatically switches to one
of these systems when it enters the relevant range.
For example: The handset is registered at the Giga-
set home base as well as at the cordless system in
the company.
a Press the On-hook key to end the operation.
Speed access to functions and phone
numbers
You can program the left display key and the number
keys 0, 2 to 9 with a phone number or function. You can
then dial the phone number or start the function pro-
grammed by simply pressing the appropriate key.
Configuring speed access
either:
0 / 2 ... 9 Press the required number key briefly.
If this key is already programmed with a function, it ap-
pears on the left display key. The number key can be
programmed with a new function.
Press the display key.
or:
0 / 2 ... 9 / Press and hold down the required number key or the
left display key.
then: A list of functions that can be programmed on the key
is displayed. The following functions are available for se-
lection:
• Speed dialling
• Call-by-call (Æ Page 55)
• Alarms (Æ Page 104)
• Calendar
• Bluetooth
st
[ Select and confirm the function.
Set
?
Quick Dial
...