To Next Page

To Previous Page

Conducting calls – with multiple users

Step by step

Conducting a conference

You can connect up to 5 internal or external partners

with each other in a telephone conference. You can in-

clude up to 4 external users in the conference.

For information purposes, you will hear a warning tone

every 30 seconds during a conference call (can be disa-

bled - ask your service engineer).

Setting up a conference

You decide to set up a conference while talking to a us-

er.

p You are on a call and wish to start a conference.

Call the system menu.

> < [Select the menu item and confirm.

o Enter the phone number of the new user.

p The user is free and answers the phone. You announce

the conference.

Call the system menu.

> < [Select the menu item and confirm.

You and your two partners are connected in a confer-

ence call.

Forming a conference

A conference has not yet been set up. However, you

are already connected to two users and are toggling be-

tween them. You now want to form a conference involv-

ing all partners.

p You are talking to one user.

Call the system menu.

> < [Select the menu item and confirm.

You and your two partners are connected in a confer-

ence call.

Expanding a conference

You can expand an existing conference to include up to

five users.

Start conference?

Conference?

Siemens HiPath 3000 Operating Instructions

Other manuals for Siemens HiPath 3000