Siemens HiPath 3000 Operating Instructions

Setting the handset
35
Step by Step
aa Press the On-hook key twice to turn the handset off and
back on.
The new base station name is now displayed in idle sta-
tus.
This name is replaced by the user’s name (where appli-
cable) or the phone number dialled when you call a user
(depending on the software version). In this case, the
name of the base station only reappears after the hand-
set has been switched off and back on again.

Siemens HiPath 3000 Specifications

General

Brand	Siemens
Model	HiPath 3000
Category	Telephone
Language	English