Siemens LOGO! CIM - Reset Button and Slots

Structure of the device
2.3 The "RESET" button
LOGO! CIM
18 Operating Manual, 10/2021, A5E51250518-AA
2.3 The "RESET" button
The RESET button allows you to recovery the module to a factory default setting.
Operator input
Function
Keep pressing for longer than 10 seconds
Recovery the module to a default status
2.4 Slots for SIM card and cellular module
Both slots are behind the top housing.
Slot for the SIM card
Compatible cards
Mini SIM card, 25 x 15 mm (ISO/IEC 7810 ID-000)
Inserting the SIM card is described in the section Insert the SIM card (Page 34).
Slot for the cellular module
Compatible cellular modules:
GSM/GPRS
UTMS
LTE
Telit LE910C1-EU LTE CAT-1 mPCIe
Y
Y
Y
Telit LE910C1-AP LTE CAT-1 mPCIe
Y
Y
Telit LE910C1-NF LTE CAT-1 mPCIe
Y
Y
SIM7600G-H LTE CAT-4 mPCIe
*
Y
Y
Y
*SIM7600G-H LTE CAT-4 mPCIe is not certified to be used in hazardous locations.
Card errors / diagnostics
Card errors are indicated by the "mPCIe" LED.
Inserting the card
Inserting the SIM card is described in the section Installing the Cellular module (Page 36).